Free Shipping on Orders $99 and Up

COMING SOON - EPIC4000 Monoblock Amplifier, 4000W RMS

$509.00

The EPIC4000 is the definitive engine for competition-grade audio.

The AudioControl EPIC Series Amplifier delivers massive, heart-pounding bass in a thermally efficient design. Perfectly paired with The EPICENTER Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels.  The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably, not just on the bench, but deep into every demanding track. It’s not just about loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores. 

 

FEATURES

• High-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems.

• High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm.

• Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue.

• 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures.

• EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB.

• Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance.

• EPICENTER Link: Simplify installation with the EPICENTER LINK (included) to seamlessly connect the EPIC amplifier and The EPICENTER bass restoration processor (sold separately) for an unbeatable bass experience and 1A fuse protection to safeguard your equipment.

• ACR-E Remote Level Control Included: Adjust your sound effortlessly with the included remote gain knob, giving you full control at your fingertips.

 

Install Requirements

• Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. This amp is living the high-current lifestyle!
• Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches
of its connection to the battery. This amp likes its fuse like it likes its bass: close and reliable.
• Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power
and ground connections. Keep your power clean and your bass mean!
• Do NOT mount the amplifier to subwoofer enclosures. These two like their personal space.

 

SPECIFICATIONS

Amplifier Topology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class D
Power Output RMS (14.4V, <1% THD). . . . . . . . . . . . . . . . . .1000 Watts @ 4 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 Watts @ 2 ohms
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4000 Watts @ 1 ohm
Frequency Response (+/- 1 dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz - 190 Hz
S/N Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.8 dBa, Ref 1000 Watts @ 4 ohms
Power / Ground Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 AWG
Speaker Terminal Wire Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AWG
Recommended Fuse Rating. . . . . . . . . . . . . . . . . . . . . 200 Amp x 2 / 400 Amps x 1
Low Pass Filter. . . . . . . . . . . . . . . . . . . 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter. . . . . . . . . . . . . . . . . . . . . . 12 dB/octave Linkwitz-Riley, Off to 50 Hz
EPIC Boost. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 80 Hz, Gain: 0 to 12 dB
Line-level Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 to 12 VRMS
Chassis Dimensions (LxWxH). . . . . . . . . . . . . . . . . . . . . . . . . . 21 in x 6.1 in x 2.04 in
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533 mm × 155 mm × 52 mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions do not include connectors

IN THE BOX: EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual

Reviews

5/5

Based on 2 reviews

Shipping

In stock

Est. arrival November 25

Key features

High-Power, Competition-Grade

Class D Amplifier

High-Current Design

4000W RMS @ 1 Ω stable

Smart Auto Reset Protection Circuit

Multiple protection modes

12 dB/octave Linkwitz-Riley

Low Pass Filter

12 dB/octave Variable

Subsonic Filter

Solid Power/Speaker Terminals

w/Hex Screws

EPICENTER Link

Connect to The EPICENTER

EPIC Boost

Variable Frequency Bass Boost

ACR-E Remote Control Knob

Included

Installation

Get help with your install

Leave the installation to an authorized AudioControl expert.

Find installers near you

More info

1 year manufacturer warranty

Please contact us to request a return. We deal with return requests on a case by case basis after we have had a chance to troubleshoot the issue. If we are unable to resolve your issue over the phone, you will be given an RA (Return Authorization) number. The RA number will need to be written clearly on the outside of the box you are shipping the product in. Product sent back to AudioControl without an RA number will be refused. Please ensure that the RA number is clearly indicated on the outside of the box so we can efficiently process the authorized return.

About this product

Unleash 4000 Watts of Competition-Grade Power

Features

High-Power, Competition-Grade Class D

The EPIC4000 was designed to power the beefiest of subwoofer systems.

EPICENTER Link

Seamlessly connect your EPIC amplifier with The EPICENTER bass restoration processor for an unbeatable bass experience.

EPIC Boost Variable Frequency Bass Boost

Enhance your bass by amplifying the low frequencies that uplift your life to the max.

ACR-E Remote Control Knob

Adjust your sound effortlessly with the included ACR-E Remote Control knob, giving you full control at your fingertips.

What's in the box

EPIC4000

EPIC4000 monoblock amplifier, wrench, screws, ACR-E remote level control and cable, THE EPICENTER LINK (1 meter harness), user manual

Specs & installation

Product specs

Amplifier Topology Class D
Power Output RMS 1000 W @ 4 ohms / 2000 W @ 2 ohms / 4000 W @ 1 ohm
Frequency Response (+/- 1 dB) 10 Hz - 190 Hz
S/N Ratio 104.8 dBa, Ref 1000 Watts @ 4 ohms
Power / Ground Wire Gauge 0 AWG
Speaker Terminal Wire Gauge 8 AWG
Recommended Fuse Rating 200 Amp x 2 / 400 Amps x 1
Low Pass Filter 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
Subsonic Filter 12 dB/octave Linkwitz-Riley, Off to 50 H
EPIC Boost 30 to 80 Hz, Gain: 0 to 12 dB
Line-level Inputs 0.5 to 12 VRMS
Install Requirement Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function.
Install Requirement Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches of its connection to the battery.
Install Requirement Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power and ground connections.
Install Requirement Do NOT mount the amplifier to subwoofer enclosures.

Dimensions

Width 6.1"
Length 21"
Height 2.04"

User guide

Our products are built for easy installation. As long as your vehicle is compatible, you'll have everything you need to get started, right there in the box.

Download user guide

Find an installer

Let us hook you up with your local AudioControl installation expert. Just enter your location to see approved installers in your neighborhood.

Find installers near you

Reviews

5 (2 Reviews)

No Reviews Found

No reviews found for this product.

See how it stacks up

Shop EPIC Series Amplifiers
COMING SOON - EPIC4000 Monoblock Amplifier, 4000W RMS

COMING SOON - EPIC4000 Monoblock Amplifier, 4000W RMS

The EPIC4000 is the definitive engine for competition-grade audio.

$509.00

5/5

Based on 2 reviews

EPIC2000 Monoblock Amplifier, 2000W RMS

EPIC2000 Monoblock Amplifier, 2000W RMS

The EPIC Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control.

$349.00

5/5

Based on 2 reviews

View product

More of what you like

SHOW US YOUR BUILD

TAG #AUDIOCONTROL TO GET FEATURED.